Brand: CABEL
Reference: 423974
Kit 5 Insulated Inox Flexos, which minimizes vibration and noise, boiler connection 200-400mm with reference 423974 of the Cabel brand.
KIT COMPOSITION
2 Extendable Inox DN12 Male-Female 1/2 "in length 200/400 + gaskets
EPDM for water.
2 Extendable Inox DN20 Male-Female 3/4 "length 200/400 + gaskets
EPDM for water.
1 Extendable Inox DN12 Female-Female 1/2 "x 3/4" length 200/400 + gaskets
NBR for gas
MATERIALS
Corrugated tube obtained from stainless steel strip.
Types of stainless steel used: AISI 321, AISI 304 or AISI 316L.
Connections made from bars of: carbon steel, brass CW619N, AISI 303
or AISI 304.
EPDM gaskets, with the exception of the gas extension gasket (white tube) that
It is made of NBR.
GAS PIPE COATING (WHITE)
Heat-shrinkable coating adheres to all tube corrugations
corrugated, made of PVC material with flame retardant properties.
This coating also protects the tube from the aggression of the environment
surrounding without affecting the mechanical extension or contraction force of the tube.
WELDING
All welding is carried out automatically using the TIG method, in
an atmosphere protected by Argon, without any type of contribution of material, through
of the direct fusion of the base materials.
WORK PRESSURE
The working pressure for the gas pipe (white pipe) is limited to 0.4 Bar, in
compliance with current regulations UNE-60713/1, which provides for its use in appliances
with a maximum heating capacity of 35kW.
"For applications other than those indicated, consult our technical department.
For water pipes, the maximum pressure is 10 Bar. "
SEALING
The tightness tests are carried out on 100% of the production: each piece is
individually tested and immersed in water by internally applying air to
pressure in order to test all parts of the tube, mainly the welds.
Sample testing, including destructive testing, is also carried out at the
internal laboratory, as required by the specific regulations in force.
RADIUS OF CURVATURE
The radius of curvature must be at least 1.5 times the outer diameter of the
tube. Never below this.
If we have, for example, a tube with an outer diameter of 18 mm, to make a bend
180º, the minimum radius of curvature should be 27 mm. See Figure.
Rápido en llegar buen precio lo esperado lo recomiendo
How do reviews and ratings work?
The opinions and ratings of the products are mostly made by registered customers who have purchased the product. These reviews appear with a "verified purchase" mark. In any other case this mark does not appear. The rating of the product, out of 5 stars, is obtained with the average of all published reviews of the product. To ensure that the information is useful to other customers, comments and ratings, whether positive or negative, they are published after prior validation.