Sanicondens Basic condensate evacuation pump SKB, SFA

4 INPUTS FOR EASY INSTALLATION.

REDUCED SIZE.

RESISTANT TO ACID WATER.

PRINCIPLE OF WORK

These devices work with a level buoy system: when using the air conditioning device or the condensing boiler, the water level rises within the

p>

tank and the pressure activates the system. The turbine immediately evacuates the condensate through the evacuation pipe. The pump can be operated several times depending on the amount of water required. evacuate.

INSTALLATION TIPS

The appliance must be installed so that access

is easy for control and maintenance.

SANICONDENS® Mini and SANICONDENS® Basic

have wall fixing devices.

It is essential to level the pump both in

can function correctly.

TIPS FOR USE

This device does not need a

CONNECTIONS

SANICONDENS® Mini and SANICONDENS® Basic have 4 inlets of Ø 28 mm. If necessary, use the inlet reduction

Ø 19/32/40 mm.

Cover the unused inlets with the plugs provided.

If necessary requires a vertical section in the evacuation route, it must be done with a Ø 8 mm tube immediately

at the pump outlet. Carry out the horizontal sections of the evacuation with a larger diameter pipe and with a rigid pipe.

The device must be connected to ground (Class I). Check that the ground resistance is less than 38 Ω.

The connection must serve exclusively to power the device

Basic

Possible connections

air conditioning +

condensing boiler +

refrigerant devices

Vertical evacuation (up to) 4.5 m

Horizontal evacuation (up to a slope

of 1%) 50 m

Inlets Ø 28 mm 4 upper 

Outlet diameter 8/11 mm 

Recommended Ø of the evacuation tube in

horizontal sections 18 mm rigid 

PH min. 2.5

Weight. 1.3 Kg

Power supply 220-240V/50 Hz

Power cable type 3 x 0.75 mm2

 + plug 

Amperage 0.52 A

Motor consumption 60 W

Material of the motor shaft stainless steel

Type of turbine blades< /p>

Water resistance index IP 20 I

Power cable length 2 m 

Max. of liquids 800 C 

Maximum flow rate  342 L/H

Tank volume 1 L

Noise level  <45 dB(A)