Sanispeed Wastewater Evacuation Pump 0101300

Allows the evacuation of waste water from a sink, a dishwasher, a washing machine, a glass washer, etc. it went higher or further.

SANISPEED can raise the waters up to 7 meters high or 70 meters away. The pump has a reinforced cooling system to be able to withstand the hottest waters for longer. It can also be perfectly used to drain water from a bathroom equipped with a shower, bidet, sink or bathtub. It has an automatic starting system that starts the motor when the water enters the tank.

It has 4 40 mm diameter inlets: 2 at the top and 2 at the bottom. lower parts of the sides.

The appliance is delivered with an evacuation elbow pre-equipped with a non-return valve that can raise the water through a 28 or 32 mm tube. diameter (we recommend using a 32 mm section tube for optimum engine performance).

SANISPEED technical sheet

Weight

6.4 kg

Motor consumption

400 W

Power supply voltage

220-240 V/50 Hz

Index of protection

IP44

Maximum horizontal evacuation

70 m

Maximum vertical evacuation

7 m

Start height

95 mm

Amperage

2 A

Temperature incoming water

75 °C intermittent (max. 5 min)

Flow rate at 3 meters

85 L/min

Entries

2 upper + 2 laterals

Type of turbine

double disc