Sanitop sanitary disposer adaptable horizontal outlet | 0100200

The SANITOP is a disposer- pump that allows to install a toilet (toilet + sink) anywhere, up to 5 meters below the general evacuation level.

The system collects the wastewater from the horizontal outlet toilet and the sink, crushes the material and thus allows it to be evacuated with a tube of only 32 mm in diameter.

Its installation is easy:

• The SANITOP grinder-pumper is simply connected to the horizontal ceramic outlet
• The sink drain is connected to the upper entrance of the SANITOP
• The toilet cistern connects to the water network
• The disposal of the disposer is connected to the network by means of a 32 mm diameter tube
• The appliance is connected to the home's electrical network

The SANITOP sanitary disposer has the latest SFA developments on noise reduction. The appliance is equipped with a set of silent-blocks that allow it to absorb a large part of the transmitted noise : in addition to operating with very short crushing cycles of 2-3 seconds, the SANITOP generates less noise than an external tank that is filled.

SANITOP technical sheet:

Number of tickets available: 2

Inlet diameter: 100/40 mm

Recommended evacuation diameter: 32 mm

Motor consumption: 400 W

Supply voltage: 220-240 V / 50 Hz

Electrical class: 1

Protection index: IP44

Maximum horizontal evacuation: 100 m

Maximum vertical evacuation: 5 m

Boot height: 95mm

Evacuation diameter: 22/28/32 mm

Flow at 3 meters: 65 L / min