SFA Sanitary Grinders

The first disposer we will talk about is SANITRIT for domestic use, designed to evacuate the water from a horizontal outlet toilet and consists of three important differential characteristics:

• Can be used to create a toilet anywhere
• Its silent operation makes you go completely unnoticed
• Its easy installation makes us not have to depend on a professional

Its application is limited to toilets and allows to evacuate the water from a toilet with a 22/28/32 mm diameter tube thanks to a grinding system that transforms solids into liquid. It allows to carry out reforms in an economic way by replacing the 110 mm tubes, apart from carrying a pumping system that can evacuate water further to a higher height, reaching up to 5 meters high or 100 meters away .

This model only needs an electricity connection and a water connection for the toilet, improving comfort at home and making its installation much easier.

Disposer for domestic use, designed to evacuate a horizontal outlet toilet and a sink, its main characteristics are the following:

• Ideal for creating a domestic secondary toilet.
• Silent operation making it practically unnoticed.
• Discreet and neat design.

Disposer-pump that allows installing a toilet (toilet + sink) anywhere, up to 5 meters below the general evacuation level.

The system collects the wastewater from the horizontal outlet toilet and the sink, crushes the material and thus allows it to be evacuated with a tube of only 32 mm in diameter .

Its installation is easy:

• The SANITOP grinder-pumper is simply connected to the horizontal ceramic outlet
• The sink drain is connected to the upper entrance of the SANITOP
• The toilet cistern connects to the water network
• The disposal of the disposer is connected to the network by means of a 32 mm diameter tube
• The appliance is connected to the home's electrical network

Disposer-pump to create a bathroom anywhere, up to 5 meters below the evacuation level.

• Quiet operation
• Full bathroom

The SANIPRO sanitary disposer model allows the reform or creation of a complete bathroom with a shower.

It has 4 entrances to collect wastewater from:

• A WC with horizontal outlet through its central entrance
• A sink by its upper entrance
• A shower through one of its low side entrances
• A bidet for another of its low side entrances

Its integrated pumping system allows it to evacuate this wastewater up to 5 meters high or 100 meters horizontally , and that through a tube of only 32 mm in diameter . The SANIPRO start-up, like the other devices in the range, is automatic.

The connections of the bathroom appliances (sink, shower and bidet) are made using 40 mm diameter tubes. Evacuation is carried out by an elbow (included) pre-equipped with a non-return valve .

The narrowest disposer-pump in the range , to create a bathroom in any room.

• Only 13 cm deep
• Quiet operation
• Full bathroom

It allows to install a complete bathroom with shower, toilet, sink and bidet up to 2.5 meters below the level of the general downspout or 40 meters away from it .

At just 13 cm it can be optimally attached to a wide variety of ceramics. With the SANISLIM disposer it is thus possible to create new elegant bathroom spaces anywhere in the house.

Its installation is simple since it only requires a water connection and an electricity connection . The connections of the bathroom elements to the SANISLIM are made by means of 40 mm diameter tubes. The evacuation, which is carried out through an elbow pre-equipped with a non-return valve, is carried out with a tube of only 32 mm in diameter.

It is hidden inside the partition and can evacuate the sewage from a bathroom with shower, suspended toilet, washbasin and bidet.

• Discreet installation (inside the partition)
• Ideal for suspended WC
• 4 entrances for a complete bathroom

When it comes to a complete renovation or installation of a bathroom, aesthetics always come into account. It can be completely hidden behind a wall.

It is designed to be installed on the side of the toilet. This can be either suspended or standing with a built-in cistern .

At 14.5 cm thick, SANIPACK is the narrowest disposer in the range and is easily installed, both on the left and right of the toilet. You can evacuate the waters of a complete bathroom with shower . It has an inlet of ø 40 mm in the upper part for the wash water; a ø 80 mm side inlet for the toilet and 2 additional side inlets for the shower and bidet.

This new generation of SANIPACK can evacuate water up to 5 meters high or 50 meters away (more if a slope is made in the horizontal part of the route). At a height of 1 meter, SANIPACK can evacuate about 95 liters per minute. At 5 meters high, that is, 2 floors, it evacuates about 53 liters per minute.

A toilet that integrates a grinder-pump system: it allows to create a toilet in the smallest places.

• Silent
• Compact
• Sink connection
• Low water consumption

Ideal device to install a secondary toilet with sink up to 3 meters below the level of the general downspout of the house or 30 meters away from it.

The compact concept is ideal for creating a toilet with a sink in the tightest spaces , particularly the SANICOMPACT C43 model since it is only 43 cm deep. Compact operation is simple: they have a double flush button (1.8 liters / 3 liters) that starts a rinse - crush - evacuation - rinse cycle. By pressing one of the drain buttons, a solenoid valve opens and draws the water directly from the home network, just like a washing machine. This system avoids the installation of an external cistern.

The SANICOMPACT C43 disposer can also evacuate the water from a sink, through a connection with a 40 mm diameter tube. The appliance has a detector that automatically starts the pumping system when the water reaches the motor. The SANICOMPACT C43 is evacuated with a tube of only 32 mm in diameter.

A reduced size evacuation pump to create a new shower or shower room where there is no traditional evacuation.

• Little size
• 2 tickets

Gray water evacuation pump that can raise water up to 4 meters high or 40 meters away.

It is designed to collect the water from a shower, a sink and a bidet. Small in size, it can be easily hidden in a cabinet or even under the shower tray as long as it is high enough.

To work, the pump only needs an electrical outlet and a water outlet . The engine is started by means of a pressure sensing system: the water enters the tank and presses the sensor, which then starts the engine.

The connections of the devices to be evacuated are made with a diameter of 40 mm for the shower inlet and a diameter of 32 mm for the sink. The SANISHOWER evacuation pump is delivered with an evacuation elbow pre-equipped with a 32 mm diameter non-return valve .

Drainage pump to create a kitchen or laundry room. Hold the hot, soapy waters.

• Withstands water up to 60ºC
• Quiet operation

The SANIVITE gray water evacuation pump is ideal for adding household accessories to your home where it is most needed : a basement, an attic, etc.

It allows to evacuate the waste water from a sink, a dishwasher, a washing machine, etc. it was higher or further away.

The evacuation pump can raise water up to 5 meters high or 50 meters away.

This pump has been developed to withstand the hot waters that come from the usual household appliances in the house but it can perfectly serve to evacuate the waters of a bathroom equipped with a shower, bidet, sink or bathtub. It has an automatic starting system that starts the engine when the water enters the tank.

It has 4 inlets of 40 mm in diameter : 2 in the upper part and 2 in the lower parts of the sides. The appliance is delivered with an evacuation elbow pre-equipped with a non-return valve that can raise the water through a 28 or 32 mm diameter tube (we recommend using a 32 mm section tube for optimal work of the engine).

So far our selection of Sanitrit shredders, we hope we have resolved your doubts and indecisions and see you on the next blog!